 |
 |
 |
|
D4-9X Package 9,000-lbs. Capacity Four-Post Lift / High Rise, Extended Length / Includes Caster Kit, Drip Trays, and Aluminum Ramps
If your vehicle has a longer wheelbase such as a long bed or crew cab truck, you might want to consider the Dannmar D4-9X. The runway length is 198" so it will easily accommodate a long wheelbase, plus it's rated to lift 9,000 lbs. The dimensions of this lift make it about two feet longer than most other four post lifts.
Dannmar's four-post D4-12 lift is designed to work with most vehicles. With a 12,000 lb. capacity you not only know that it is capable of lifting most anything, but it also has to be built very strong, rugged, and durable. With Dannmar's extended runways, moving onto the runway is safe and simple for vehicles of all sizes.
The quality built into each Dannmar lift is demonstrated by the Dual-hub cable sheaves that reduce stress, fatigue and wear. Huge 10.5" diameter cable sheaves within the runway and cross tubes combine with massive 2.25" diameter sheave axles. These larger components help to share the load, which dramatically decreases cable wear and increases critical component lifespan.
To help raise and lower the hefty 12,000 lb. load are a series of heavy-duty aircraft cables. The Dannmar D4-12 incorporates four, 1/2" diameter, stainless-steel lifting cables specifically designed for lifting applications. To keep everything moving freely, the Dannmar D4-12 utilizes built-in lubrication points located on each sheave and sheave axle.
Dannmar D4-9X
| Dannmar D4-9X |
| SKU# |
5175321 |
| Lifting Capacity |
9,000 lbs. (4,082 kg) |
| A - Min. Runway Height |
5" (127 mm) |
| B - Max. Rise |
82" (2,083 mm) |
| C - Max. Lifting Height |
87" (2,210 mm) |
| D - Height of Columns |
99" (2,515 mm) |
| E - Drive-Thru Clearance |
86" (2,184 mm) |
| F - Overall Width |
114.5" (2,908 mm) |
| G - Width Between Columns |
98" (2,489 mm) |
| H - Overall Length |
227" (5,766 mm) |
| I - Outside Columns |
200.5" (5,093 mm) |
| J - Width Between Runways |
37.5" (953 mm) |
| K - Runway Centerline |
53.75" (1,365 mm) |
| L - Outside Edge of Runways |
72.5" (1,842 mm) |
| M - Runway Width |
18.75" (476 mm) |
| N - Length of Runways |
189.75" (4,820 mm) |
| Min. Wheelbase @ Rated Capacity |
135" (3,429 mm) |
| Min. Wheelbase @ 75% Capacity |
115" (2,921 mm) |
| Min. Wheelbase @ 50% Capacity |
95" (2,413 mm) |
| Min. Wheelbase @ 25% Capacity |
80" (2,032 mm) |
| Locking Positions |
16 (spaced every 4" / 102 mm) |
| Time to Full Rise |
60 seconds |
| Motor |
110VAC, 50-60HZ, 1PH, 20A or 208-230VAC, 50-60HZ, 1PH, 25A |
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- CE Approved and Certified
- Meets or exceeds the standards prescribed by European Standard EN-1493
- Mid to long-style approach ramps for low-ground clearance vehicles
- Runways include rail-kit for optional accessories
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Pneumatic push-button safety release
- Heavy-duty 1/2" aircraft cable and 1.75" roller axles
- Safety locks enclosed in columns minimize pinch points
- Oversized sheave diameter reduces cable fatigue
- Large self-lubricating cable rollers
- Multi-position safety locks in each column
- Customizable power unit location
- Approach ramps incorporate built-in rear-wheel chocks
- Independent backup slack-cable safety latches
- Runways feature non-skid surface
- Optional drive-thru ramps available
- Optional drip trays available
- Optional 6,000-lb. capacity rolling jacks available to raise front or rear of vehicle
- ETL approved
|
|
|
|
|
|
|
